成都正西液压设备制造有限公司

      本系列产品适用于汽车、航空航天、家电、军工等行业热固性、热塑性塑料制品成型。

      复合材料种类多，目前市场上液压机成型中广泛应用的复合材料有玻璃纤维、炭纤维、玄武岩纤维等主导材料。

      液压机在产品工艺中主要承担模压成型工艺，利用各异型的模具，通过高压与热固成型。根据模具与产品配方不同，制造出各种形状、各种颜色、各种强度的复合材料产品。

• •  主要用于热固性（玻璃钢）塑料制品、热塑性制品的整体模压成型，适用于SMC、BMC、DMC、GMT等各种团材及片材的模压成形；
  • It is mainly used for the integral forming of thermosetting (FRP) plastics and thermoplastic products. Suitable for the forming of SMC, BMC, DMC, GMT and other bulks and sheets.
  • l 八面式导向结构，加大导向面积，抗篇载能力强；
  • Eight sides guiding structure, enlarge guiding area, greatly improved incline load proof capacity.
  • l 多缸均布结构，横梁加高式设计，模压成型稳定性更强；
  • Uniform distribution of multiple cylinders, design of Cross Beam Heightening, making the forming process more stable.
  • l 液压系统安装在机顶上，配维修平台，环保，噪音低，维保方便；
  • Hydraulic system is installed on the roof with maintenance platform, environmentally friendly, low noise and easy maintenance.
  • l ≥500mm/s速度快速合模，可分多段速度慢速加压成型，合理预留排气时间；
  •  Shutting mold speed more than 500mm/s, multiple-stage slow speed pressure forming, reasonable reserved exhaust time
  • l 高压慢开模功能，适用于较高的产品；
  • With the function of high pressure slow opening mold, suitable for high products.
  • l 伺服系统快速响应，全数字化控制，油泵功率节能40%-80%；
  • l Quick response of system, numerical control system, the energy saving rate of oil pump can reach 40%-80%.
  • l 微电脑闭环加热控制系统，温控可达±2℃，模具加热节电10%以上;
  • Microcomputer closed-loop heating control system, temperature control can reach ±2℃, mold heating energy saving more than 10%.
  • l 可选：废气净化系统，换模小车，远程售后服务系统，双闭环伺服系统；
  • l Optional accessories: waste gas purification system, mold change car, VPN remote after-sale service system, double closed loop servo system.
  • l 采用双闭环伺服系统压力控制精度可达±0.05Mpa，位置控制精度可达±0.01mm；
  • The pressure control accuracy of double closed-loop servo system can reach ±0.05 Mpa， and the position control accuracy can reach ±0.01 mm.

高品质(通过ISO9001质量体系,CE欧盟安全认证,完善的售后回访制度,严格把关每一个细节,做到每台设备都在优化改进)